PAX-541427US - Paxton PAX-541427US Net2 Plus - An advanced access control unit...
- Part Number:
- PAX-541427US
- Model Number:
- PAX-541427US
- Make:
- PAXTON
- Lead Time:
- Available
- Qty In Stock:
- Available
Paxton PAX-541427US Net2 Plus - An advanced access control unit with TCP/IP connectivity Simple Type: Control Board
Net2 is a PC based security system for controlling access through doors. Net2 allows users to be given access to particular areas at certain times. Because the system is networked, all administration can be done from a central point. Net2 plus is one of three control units for the Net2 system. It is the most advanced control unit, employing the latest technology and offering huge potential for future expansion. As security technology develops, Net2 plus can take full advantage. Unlike many systems of its type Net2 plus is truly future-proof. Using Net2 plus ensures that the investment in access control is safe no matter how the system requirements change. Net2 plus has on-board TCP/IP to allow direct connection to a computer network. This can save time, money and result in a better, more resilient system. Net2 plus control units can also be connected together using a dedicated RS485 network. This reduces the number of TCP/IP network points required for larger systems. As with all Net2 control units, Net2 plus is designed to work seamlessly in the event of communications failure. It will continue to permit or deny access to users as appropriate. Once communications are re-established the activity is reported back to the PC.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Diagnostic LED's
- FLASH memory allows easy upgrades
- Net2 plus can also connect using RS485
- Net2 plus can replace a TCP/IP convertor
- Net2 plus, Net2 classic and Net2 nano control units can be mixed on a site
- Plug into a TCP/IP network using a standard RJ45 plug
- Single door networkable access control unit
- Use Paxton Access or 3rd party readers
Specifications
- 26 bit Wiegand: Yes
- 3rd party readers: Yes
- Alarm output current: 1 A
- Clock and data: Yes
- Code length: 4 - 8
- Combined reader port output current: 500 mA
- Custom Wiegand: Yes
- Data cable type: CAT5 or Belden 8723
- Data lines per PC: Max 100
- Data retention during a total power loss: 28 days
- DHCP support: (fixed IP recommended) Yes
- Door open time: Min 1 sec - Max 999,999 sec
- Doors per Access Control Unit (ACU): 1
- Ethernet bandwidth requirement: 200 kbit/s
- Ethernet network speed: 10 Mbit/s - 100 Mbit/s auto MDIX
- Hands free compatible: Yes - requires interface
- Input for exit button: Dedicated intruder alarm integration port
- Input for PSU fail: Integrated termination resistors
- Input for tamper: Alarm output
- Number of access levels: 250
- Number of codes: 50
- Number of PIN's: 50,000
- Number of time slots: 2,000
- Number of time zones: 64
- Number of tokens: 50,000
- Operating temperature - battery limits: Min 0°C - Max +55°C
- PIN length: 4 - 8
- Reader cable type: Belden 9540
- Reader ports per ACU: 2
- Readers/Keypads per ACU: 4 - check current draw on individual readers
- Relay switchable current: 4 A
- Relay switchable voltage: 24V DC
- RS485: 200 ACU's per data line
- RS485 network speed: 115.2 kbit/s
- Software required: Net2 v4.14 and above
- Stored events per ACU: 2,728
- Supply current: 200 mA
- Supply voltage: Min 11V DC - Max 15V DC
- TCP/IP Ethernet: ACU has an on-board TCP/IP to RS485 converter
- TCP/IP nodes: Max 200
- Total doors: Max 500 doors. Max 200 per RS485 data line. Max 100 TCP/IP connections
- Total users: 50,000
- Volt free control relay: Input for door contact
- Waterproof: No - If used externally, it must be protected in a weatherproof housing
Applications
- None Available
Aliases
- None Available